The LED indicators on the LytxOne Gateway (LX1-G) and LytxOne Camera (LX1-C) show the system's power, connectivity, and operational state. Below is a guide to what each LED status means for the Gateway and the Camera.
LytxOne Gateway LEDs
POWER LED
- Green: The Gateway is connected to power and is in either an active or standby state.
GNSS LED (GPS Status)
- Off: The Gateway is in standby mode, and the GNSS and CELL LEDs are inactive.
- Red: The GNSS is active but has not acquired any satellites.
- Blinking Red: The Gateway is attempting to acquire satellites but has not yet achieved a location fix.
- Green: The GNSS has successfully acquired satellites and a location fix.
CELL LED (Network Connectivity)
- Off: The Gateway is in standby mode, with no active network connection (GNSS LED is also off).
- Red: No SIM card is detected in the Gateway.
- Blinking Red: The Gateway is attempting to connect to a mobile network.
- Blinking Green: The Gateway is connected to the mobile network but not yet to the LytxOne platform.
- Green: The Gateway is fully connected to both the mobile network and the LytxOne platform.
LytxOne Camera LEDs
Power LED (Green)
- On: The camera is powered and in an active state.
- Off: The camera is in standby mode or powered off.
Event LED (Red)
- Blinking: A visual event alert is active, indicating that the camera has detected and recorded an event.